| 00:34 | firemanxbr | jmontleon, thanks guy I'm geting this new kernel :D |
| 00:34 | firemanxbr | jmontleon, after my testing I send my feedbacks about this |
| 00:43 | _dab_ | jnettlet: any reason for your kernel enabling MTD, UBI,NAND ? |
| 00:56 | _rmk_ | alpha_one_x86: I just quickly wrote this - it may help you: https://plus.google.com/103895730806848715870/posts/dDFGdPL2oEn (I hope you can get to it) |
| 00:56 | firemanxbr | jmontleon, usb not sucess |
| 00:56 | firemanxbr | jmontleon, same problem, I test in both usb ports, but my keyboard is not run |
| 00:57 | _rmk_ | firemanxbr: can you log into the cubox-i? |
| 00:57 | firemanxbr | _rmk_, hey |
| 00:57 | firemanxbr | _rmk_, in bios my keyboard run |
| 00:57 | alpha_one_x86 | _rmk_: I will test tomorow |
| 00:58 | firemanxbr | _rmk_, but after boot no print error and no run |
| 00:58 | _rmk_ | firemanxbr: can you log into it via the network? |
| 00:58 | firemanxbr | _rmk_, in this kernel my cubox-i no get ip from dhcp gateway |
| 00:59 | firemanxbr | _rmk_, in this momento my cubox is black box, no acess, no network, and no use |
| 00:59 | firemanxbr | _rmk_, I try run default kernel Fedora |
| 01:01 | firemanxbr | _rmk_, I believe u-boot problem on set keyboard and more.... |
| 01:03 | firemanxbr | _rmk_, my model is I4P-300-D |
| 01:03 | firemanxbr | _rmk_, the cubox site refer this model: cubox-i4pro |
| 01:07 | alpha_one_x86 | _rmk_: 4) how? |
| 01:08 | _rmk_ | setenv fdt_addr 0x18000000 |
| 01:11 | alpha_one_x86 | where put that's? sorry noob with uboot |
| 01:13 | _rmk_ | alpha_one_x86: reload that post - I just added that detail :) |
| 01:14 | alpha_one_x86 | ok, in my case, I have always failed to access uboot console, I don't know why |
| 01:17 | _rmk_ | are you connected via a serial connection (the micro-usb on the rear)? |
| 01:20 | alpha_one_x86 | no, I don't have the adaptor, I don't haver other stuff to read serial console |
| 01:21 | alpha_one_x86 | I'm on gentoo + debian kernel |
| 01:22 | firemanxbr | _rmk_, you can help me ? |
| 01:22 | firemanxbr | _rmk_, I test all alternatives, but my cubox-i no runing some parts |
| 01:23 | firemanxbr | _rmk_, I following this steps: https://github.com/jmontleon/fedora-20-cubox-i4pro |
| 01:23 | firemanxbr | _rmk_, you have other sugestions for debug or test alternatives ? |
| 01:27 | _rmk_ | alpha_one_x86: gah, that's annoying... you have the exact opposite combination to me... I can't use keyboard/display with uboot on the cubox-i, so I have to do everything via serial with that, so I've no experience of using it that way. |
| 01:28 | _rmk_ | firemanxbr: it sounds like the kernel isn't booting for some reason... maybe it's the same reason I'm trying to work out with alpha_one_x86 :p |
| 01:29 | alpha_one_x86 | :( why uboot, why note coreboot + tianocore... |
| 01:29 | firemanxbr | _rmk_, is possible |
| 01:29 | alpha_one_x86 | i my case, I confirm: kernel don't mount and start the service... no log writen with my kernel (vanilla or patched) |
| 01:30 | firemanxbr | _rmk_, my kernel is run, I view login and motd of Fedora |
| 01:30 | _rmk_ | because uboot was the fastest to get going on the platform, and it's what almost everyone has been using. |
| 01:30 | firemanxbr | _rmk_, but I not connect and use with Fedora |
| 01:31 | _rmk_ | so it's just that keyboard and mouse don't seem to work but you get a display? |
| 01:31 | alpha_one_x86 | _rmk_: I don't understand, not native english speaker, boot time or easy to use? |
| 01:33 | firemanxbr | yes in my case, my display is normal runing from hdmi monitor |
| 01:33 | _rmk_ | alpha_one_x86: easiest to get running, because it's what everyone else uses |
| 01:34 | alpha_one_x86 | I'm not sure of that's, you see all the user with kernel boot problem |
| 01:35 | firemanxbr | I believe this problem is cause for u-boot |
| 01:36 | firemanxbr | if this kernel(https://github.com/jmontleon/fedora-20-cubox-i4pro) was perfect construction |
| 01:37 | firemanxbr | someone already tested with the keyboard? or if the handle Cubox ip via ethernet cable? |
| 01:37 | alpha_one_x86 | With UEFI, just build EFI kernel, put at the right place, the display will always work... |
| 01:37 | _rmk_ | sorry, I don't think I can help any further. can you please post to the forums at http://imx.solid-run.com/forums/ and/or talk to people concerned directly (like jmontleon) |
| 01:38 | firemanxbr | no problem |
| 02:33 | firemanxbr | hey guys my cubox-i finish get ip from dhcp :D |
| 02:34 | firemanxbr | I'm logged into :) |
| 02:36 | dv_ | \o/ |
| 02:36 | firemanxbr | first erros beging: Feb 25 20:36:06 localhost kernel: [ 291.010896] brcmfmac: brcmf_cfg80211_sched_scan_start: Invalid sched scan req!! n_ssids:0 |
| 02:36 | firemanxbr | :D |
| 04:07 | firemanxbr | someone view this error in cubox-i: unable to initialize libusb: -99 |
| 04:07 | firemanxbr | my ports usb no correctly running |
| 04:07 | firemanxbr | and lsusb returning this error |
| 06:32 | jmontleon | firemanxbr, try running depmod -a and rebooting or reinstall the kernel package when the system is up and running |
| 06:41 | jmontleon | firemanxbr, if one of those things works let me know and I'll update the instructions to include a step |
| 06:41 | jmontleon | otherwise maybe you need an updated u-boot? dunno, that 3.14-rc4 kernel is definitely working for me |
| 09:10 | LangeOortjes | jmontleon: Running your 3.14-rc4 kernel. Still problems with getting a proper framebuffer |
| 11:42 | firemanxbr | hey guys I'm back :D |
| 11:43 | firemanxbr | in brazil are 7:42 am :) |
| 11:43 | firemanxbr | return for my issues with cubox-i4pro :D |
| 11:44 | rabeeh | firemanxbr: welcome back :) |
| 11:44 | rabeeh | what are the issues with CBi4pro? |
| 11:45 | rabeeh | which kernel are you running now? |
| 11:45 | firemanxbr | :D |
| 11:45 | firemanxbr | my stats now: |
| 11:46 | firemanxbr | my first tests with cubox-i4pro |
| 11:47 | firemanxbr | and following some tips of jmontleon(tahnkz for shared your changes in github) |
| 11:47 | firemanxbr | I have this first board, running Fedora 20 with kernel: |
| 11:47 | firemanxbr | Linux localhost 3.14.0-204.rc4.cubox_i4pro.fc20.armv7hl #1 SMP Tue Feb 25 13:01:17 EST 2014 armv7l armv7l armv7l GNU/Linux |
| 11:47 | firemanxbr | it's okay: ethernet support |
| 11:47 | firemanxbr | wi-fi support |
| 11:48 | firemanxbr | hdmi - support |
| 11:48 | firemanxbr | but USB not functional |
| 11:48 | firemanxbr | see this outputs: |
| 11:48 | firemanxbr | running lsusb: unable to initialize libusb: -99 |
| 11:49 | firemanxbr | and more tests, I set: dmesg -C, after unplug keyboard and webcam(both usb ports) |
| 11:49 | firemanxbr | runing dmesg again and zero output :( |
| 11:50 | firemanxbr | I believe this kernel with some problems with usb support |
| 11:50 | firemanxbr | someone have fulldescription about this hardware ?(cubox-i4pro) |
| 11:52 | rabeeh | it's either that or simply the USB ports power enable is not powered |
| 11:52 | rabeeh | do you have some sort of a dongle that tells if power is enabled or not? for instance i have a bluetooth dongle that it's led blinks when there is a vbus |
| 11:53 | rabeeh | notice the following thread i'v just updated - |
| 11:53 | firemanxbr | another point that I found strange is the return of lsmod is empty any loaded module |
| 11:53 | rabeeh | http://imx.solid-run.com/forums/viewtopic.php?f=10&t=693&p=4636#p4636 |
| 11:53 | jnettlet | firemanxbr, please post the full output of dmesg so it can be reviewed |
| 11:53 | rabeeh | why is that strange? |
| 11:54 | rabeeh | i haven't used jmontleon kernel and work; but if the kernel modules are same versions like the kernel then you might see something |
| 11:54 | rabeeh | specifically i'm not sure if the wifi drivers are statically part of the kernel or as modules |
| 11:54 | firemanxbr | jnettlet, okay I need reboot now(cubox-i) and get this output |
| 11:55 | rabeeh | please put on pastebin.com |
| 11:55 | firemanxbr | rabeeh, my keyboard and my webcam no running your leds |
| 11:56 | firemanxbr | is strange that in fedora lsmod always return all modules loaded, but in this kernel no load modules |
| 11:57 | jnettlet | firemanxbr, in arm linux it is not uncommon for all the hardware to be built directly into the kernel not as modules |
| 11:57 | firemanxbr | jnettlet, this output for dmesg after reboot: http://ur1.ca/gpb41 |
| 11:58 | firemanxbr | jnettlet, okay it's true |
| 11:58 | firemanxbr | jnettlet, but I use modprobe and no load some module, is strange :) |
| 12:00 | jnettlet | firemanxbr, there is no usb support in that kernel. You need to modprobe the drivers or have jmontleon fix his kernel. |
| 12:00 | firemanxbr | this error always present in /var/log/messages: |
| 12:01 | firemanxbr | brcmfmac: brcmf_cfg80211_sched_scan_start: Invalid sched scan req!! n_ssids:0 |
| 12:01 | jnettlet | yep it is a problem with the upstream driver. patches are making their way through channels to fix it |
| 12:02 | firemanxbr | jnettlet, no problem, I go create my custom kernel now, and testing with support usb |
| 12:02 | firemanxbr | about kernel is no problem for me |
| 12:03 | firemanxbr | my intention is to make it a little easier life for Fedora users |
| 12:03 | jnettlet | firemanxbr, if you want everything on the your cubox-i to be fully supported you should really use my 3.10 based kernel. |
| 12:04 | firemanxbr | when using cubox-i board :D |
| 12:04 | firemanxbr | jnettlet, humm great tip guy |
| 12:04 | jnettlet | I include a lot of fixes and drivers that won't be included in the upstream kernel of Fedora anytime soon. |
| 12:05 | firemanxbr | jnettlet, exist some base or I can use Fedora kernel 3.10 release ? |
| 12:05 | jnettlet | firemanxbr, https://github.com/linux4kix/linux-linaro-stable-mx6 |
| 12:05 | jnettlet | it will be moved the the SolidRun github account soon |
| 12:06 | firemanxbr | cool :D |
| 12:06 | firemanxbr | jnettlet++ |
| 12:07 | LangeOortjes | firemanxbr: you have working HDMI? |
| 12:07 | firemanxbr | jnettlet, I believe we have working for take all support for this hardware to upstream kernel |
| 12:08 | firemanxbr | LangeOortjes, yes for me perfect use, but I used only console terminal :D |
| 12:08 | LangeOortjes | I am running jmontleon's 3.14-rc4 but fbset reports timings 0 0 0 0 0 0 0 |
| 12:08 | LangeOortjes | the result is an occassionally flashing display |
| 12:09 | LangeOortjes | other than that, I am quite happy. Did you alter any kernel configuration settings? |
| 12:09 | firemanxbr | LangeOortjes, hummm, what cable your using ? and what monitor hdmi ? verify cable type and monitor frequency |
| 12:10 | jnettlet | firemanxbr, there are some drivers that currently can't be merged upstream. We are working on that but it will take some time. |
| 12:10 | LangeOortjes | firemanxbr: rabeeh's 3.0.35 works fine. I copied the timings as detected by 3.0.35, but when I set them using fbset, it reports: "ioctl FBIOPUT_VSCREENINFO: Invalid argument" |
| 12:11 | firemanxbr | LangeOortjes, about hdmi no, but I need construction one new kernel based in release 3.10 and return for you about news :D |
| 12:11 | jnettlet | LangeOortjes, the 3.14 upstream kernel is using kernel modesetting not fbdev drivers. |
| 12:11 | rabeeh | firemanxbr: in my mind to get fastest results you either want to work on LK 3.0.35 or the newer LK 3.10.30 |
| 12:13 | firemanxbr | jnettlet, I can help ? I'm here, in Fedora I helping some boards for perfect support with Fedora linux |
| 12:15 | firemanxbr | rabeeh, yes, my goal is running all features of cubox-i with Fedora 20 and kernel mainstream of fedora, in this moment the best kernel for Fedora is: |
| 12:15 | firemanxbr | Linux firelap.local 3.13.4-200.fc20.x86_64 #1 SMP Thu Feb 20 23:00:47 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux |
| 12:16 | firemanxbr | release 3.13.*, but begining 3.14 comming soon :) |
| 12:17 | firemanxbr | https://fedoraproject.org/wiki/Kernel (about our kernel used) |
| 12:18 | firemanxbr | jnettlet, rabeeh my tests in Fedora: https://fedoraproject.org/wiki/Architectures/ARM/Quality_Assurance/Kernel_Testing/Fedora_20 |
| 12:20 | firemanxbr | my wish add cubox-i in this tests |
| 12:22 | LangeOortjes | jnettlet: thanks, appears to be a problem with this particular screen, another works fine |
| 12:23 | LangeOortjes | alright, I am quite happy now :) |
| 12:23 | firemanxbr | LangeOortjes, cool :D |
| 12:34 | rabeeh | LangeOortjes: which screen was that? |
| 12:49 | LangeOortjes | rabeeh: Acer H223HQ |
| 14:50 | heap_ | ah xmbc for arch on cubox still broken ;/ |
| 15:00 | firemanxbr | jmontleon++ |
| 15:01 | firemanxbr | my cubox-i now with USB support is done :D and in perfect use, congrats for guy jmontleon |
| 15:35 | LangeOortjes | firemanxbr: heh, I am happily using that kernel as well. The only thing I notice is a slightly longer delay before my ssh-session responds to my key pressed. I don't know what's causing this though, don't notice it on 3.0.35 :) |
| 15:35 | firemanxbr | LangeOortjes, verify your dns configs, is possible |
| 15:36 | firemanxbr | slow ssh always is dns resolv is problem |
| 15:36 | firemanxbr | in my cubox-i very fast all use |
| 15:48 | LangeOortjes | firemanxbr: I am pretty sure it is not related to DNS, it's not the actual login that is slow (so no problems with reverse DNS look-ups), it's just that the delay between me typing a character and it showing up on screen has increased |
| 15:53 | rabeeh | firemanxbr: my guess is that the ethernet receive interrupts are not getting there and the driver is timing out on rx; then checking the rx ring and passing whatever is there ! |
| 15:54 | firemanxbr | LangeOortjes, rabeeh strange, I agree |
| 15:54 | firemanxbr | LangeOortjes, in my tests here, from ethernet cable, is perfect |
| 15:54 | firemanxbr | LangeOortjes, you use from wi-fi ou cable rj45 ? |
| 16:06 | LangeOortjes | firemanxbr: yes, it's connected via ethernet. The connection seems to be working nicely, with a high transfer rate and low latency between my laptop and cubox |
| 16:08 | firemanxbr | LangeOortjes, humm, strange |
| 16:08 | firemanxbr | LangeOortjes, in this momento no idea about this |
| 16:09 | firemanxbr | LangeOortjes, we need more informations, logs, troubleshooting, and more... |
| 16:09 | firemanxbr | LangeOortjes, I can't reproduce this problem in my cubox-i :( |
| 16:17 | davorin | LangeOortjes: do you have it connected to a switch apparently? |
| 16:17 | LangeOortjes | davorin: yes, it's connected to an Airport Extreme |
| 16:17 | davorin | does it support flow control on layer2? |
| 16:18 | davorin | the fec has flow control on by default...and most switches have it off by default... |
| 16:18 | davorin | though i wouldn't expect it to delay that way with a ssh connection... |
| 16:19 | davorin | with movies it shows a big difference though... |
| 16:19 | davorin | what does ifconfig show you? any errors/drops? |
| 16:22 | LangeOortjes | Arch uses iproute2, for eth0 it shows |
| 16:22 | LangeOortjes | RX: bytes packets errors dropped overrun mcast |
| 16:22 | LangeOortjes | 5481171 7524 2 0 0 0 |
| 16:23 | LangeOortjes | afk |
| 16:28 | davorin | hmm... |
| 16:28 | davorin | and when you do a iperf between cubox-i and your pc? |
| 16:29 | davorin | or you could enable telnetd and see if it lags as well... |
| 16:31 | pahartik | LangeOortjes: How does one ask "ip" to show that? |
| 16:45 | dandandan | hey |
| 16:46 | dandandan | im getting a ntpdate no servers can be used exiting on first bootup of debian |
| 17:03 | davorin | pahartik: cat /proc/net/dev |
| 17:10 | jmontleon | dang, sandisk announced a 128gb micro sd card |
| 17:11 | davorin | old saying, as soon you buy it, its obsolete (o; |
| 17:11 | davori | 17:11 * davorin wonders why geexbox plays 720p videos as audio only... |
| 17:12 | davorin | maybe too early to sell my popcorn hour boxes... |
| 17:31 | LangeOortjes | pahartik: ip -s link |
| 17:32 | LangeOortjes | jmontleon: but it's quite pricey ;) |
| 17:33 | jmontleon | yes. I have heard it's already $80 off so like $120. but looks like $199 is their 'normal' asking price |
| 17:33 | jmontleon | too much for me. even at $120. but nice to see such a large amount of storage in such a small package |
| 17:34 | LangeOortjes | time to install the SSL fix for OS X, I also like this particular change: "improves the accuracy of unread counts in Mail" |
| 17:35 | LangeOortjes | That price went down very quickly indeed |
| 17:36 | jnettlet | crypt0s, have you made progress? |
| 17:36 | jnettlet | I will have some more patches to push soonish |
| 17:38 | jmontleon | jnettlet, accelerated graphics work with your 3.10 kernel? |
| 17:45 | jnettlet | jmontleon, http://www.youtube.com/watch?v=xXhzkrwxYwU&list=UUd3kcCmUxX2mmmFCe8MDx9g&feature=share |
| 17:46 | jnettlet | don't mind the black screen at the end of the video. I was testing the gpu thermal protection, which worked :-) |
| 17:46 | jmontleon | nice. |
| 17:46 | jnettlet | that is a Mesa OpenGL, not GLESv2 game, 480p video being software decoded and played back |
| 17:47 | jnettlet | all at 1080p |
| 17:47 | jmontleon | I think I will probably work on a 3.10 kernel for fedora as well. doubt it would be too difficult |
| 17:47 | jnettlet | 32-bit not 16-bit |
| 17:47 | jmontleon | I guess there is an X11 driver package in Ubuntu that you're using? Or something you're building yourself? |
| 18:35 | Balkow | hi i need anyone from shop support |
| 18:40 | Balkow | anyone from the stuff here? |
| 18:47 | davorin | nope..sales is never here |
| 18:59 | pahartik | LangeOortjes: Very good, I have never noticed that during years of using "ip" |
| 18:59 | Balkow | okey thanks |
| 18:59 | Balkow | have a nice day |
| 19:04 | davorin | jnettlet? |
| 19:04 | jnettlet | yessss???? |
| 19:05 | davorin | what host os and what toolchain version are you using for compiling the kernel? |
| 19:06 | davorin | might be worth for the wiki under compiling submarine/compiling kernel section.. |
| 19:06 | jnettlet | elementary os, so ubuntu 12.04 and Linaro gcc 4.7 cross |
| 19:07 | davorin | have the gcc -v output? |
| 19:07 | davori | 19:07 * davorin wants to xcompile on osx (o; |
| 19:07 | davorin | like in the good old linux-2.0 days... |
| 19:08 | jnettlet | gcc-linaro-arm-linux-gnueabihf-4.7-2013.04-20130415_linux |
| 19:08 | jnettle | 19:08 * jnettlet should probably update it, but it seems to work fine |
| 19:08 | davorin | that's not the -v output (o; |
| 19:09 | davorin | similar to: |
| 19:09 | davorin | Configured with: ../src/configure -v --with-pkgversion='Debian 4.7.2-5' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/arm-linux-gnueabihf/include/c++/4.7.2 --libdir=/usr/lib --enable-nls --enable-cloca |
| 19:09 | davorin | le=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libitm --enable-plugin --enable-objc-gc --disable-sjlj-exceptions --with-arch=armv7-a --with-fpu=vfpv3-d16 --with-float=hard --with-mode=thumb --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --includedir=/usr/arm-linux-gnueabihf/include --with-headers=/usr/arm-linu |
| 19:09 | davorin | x-gnueabihf/include --with-libs=/usr/arm-linux-gnueabihf/lib |
| 19:09 | davorin | Thread model: posix |
| 19:09 | davorin | gcc version 4.7.2 (Debian 4.7.2-5) |
| 19:09 | jnettlet | oh but that doesn't matter as the kernel overrides almost all of that. |
| 19:09 | davorin | iirc rabeeh mentioned something about a memory bug in gcc... |
| 19:09 | jnettlet | that is 4.8 |
| 19:10 | jnettlet | I think it is fixed as of 4.8.2 but I haven't had time to go back and test |
| 19:10 | davorin | well...have to remember how i managed to compile the kernel on osx (o; |
| 19:11 | jnettlet | or boot into linux and prosper :-) |
| 19:12 | davorin | naaah |
| 19:12 | LangeOortjes | jnettlet: thanks for responding on Google+. I do feel a bit embarassed about the perhaps trivial issues I am having getting up and running with my cubox. It's just that documentation appears to very scarce and distributed and I am eager to learn ;) |
| 19:12 | jnettlet | LangeOortjes, no problem. The documentation will come. The platform is still relatively new |
| 19:13 | LangeOortjes | I realise, and if I learn enough I hope to contribute back |
| 19:14 | davorin | anyone patching on the fec driver? |
| 19:15 | jnettlet | why? |
| 19:16 | davorin | rabeeh asked me if i look into it... |
| 19:16 | davorin | don't like it uses flow control by default...and ethtool can't tturn it off... |
| 19:25 | davorin | hmm..geexbox-20140224 indeed dropped gpio lirc support... |
| 19:25 | davorin | 0117 works |
| 19:25 | davorin | ehm..20140114 |
| 19:30 | jnettlet | davorin, ethtool disables/enables the pause parameters on the 3.10 kernel |
| 19:30 | jnettlet | you just have to make sure and set both rx and tx to the same value at the same time |
| 19:30 | davorin | so default it is off then? |
| 19:31 | jnettlet | the default is to autonegotiate |
| 19:31 | davorin | okay.. |
| 19:32 | davorin | i only discovered the throughput problem with a c3750g-12s recently..as max bandwidth was 80mbits/sec |
| 19:34 | davorin | btw: the youtube clip is impressive (o; |
| 19:34 | davorin | wonder how kivy will perform then... |
| 19:35 | jnettlet | it is better there is a lot more to do |
| 19:36 | davorin | how much you get frmo solidrun in compensation? ;-) |
| 19:36 | davorin | s/frmo/from/ |
| 19:37 | jnettlet | all the cubox's I can develop on :-) |
| 19:38 | davorin | and a hb2.1 then, i assume... |
| 19:38 | jnettlet | not yet. hopefully soon. |
| 19:38 | davori | 19:38 * davorin waits also a while for it... |
| 19:39 | davorin | hope rabeeh gets well soon.. |
| 19:39 | davorin | from the pcb design it looks rather simple..only 4 layer it is...2 of them planes |
| 19:40 | davorin | https://shop.klingler.net/image/news/hummingboard2.png |
| 19:47 | davorin | bugger, i'm out of hdmi/dvi-d cables... |
| 19:53 | davorin | hmm..."Orders will be handled starting 3/30/2014" |
| 19:53 | davorin | anyone knows a cheap device to test spdif audio output? |
| 19:55 | davori | 19:55 * davorin switching to sofa and laptop... |
| 20:00 | jas-hacks | jnettlet: nice video! did you notice any tearing while moving/resizing the windows around? |
| 20:01 | jnettlet | jas-hacks, there is a little because we aren't drawing to vsync yet. That will change with the switch to KMS |
| 20:10 | davorin | ah i see on my laptop now you already discussed the flow stuff last night (o; |
| 20:10 | davorin | do you have an image ready to test again with my cisco switch? |
| 20:11 | jas-hacks | jnettlet: for KMS you looking to implement modesetting + buffer management? |
| 20:11 | jnettlet | jas-hacks, yep we are extending the work that rmk did for the original Cubox |
| 20:33 | jas-hacks | jnettlet: with KMS implemented will the EXA driver use the KMS iotcls? |
| 20:41 | jnettlet | jas-hacks, yep |
| 21:13 | normalAL | greetings! |
| 21:23 | normalAL | I AM THE GREAT DANTON! What you are about to see.. is considered safe! |