| 12:50 | purch | dd SPL with seek=1 or seek=2? |
| 13:09 | purch | seek=1 worked |
| 13:21 | jnettlet | purch, bs=1K seek=1 or seek=2 with bs=512 |
| 13:26 | purch | ok, that makes it |
| 13:26 | purch | dist-upgrading ubuntu trusty on i4 now |
| 13:41 | jnettlet | purch, you just run this headless right? trusty breaks xorg acceleration |
| 13:44 | purch | yes, headless server |
| 13:47 | purch | what is the status of gpu stuff for 3.10? |
| 13:58 | jnettlet | purch, works great as far as I know. |
| 14:19 | purch | gpu drivers work with 3.10, but not with trusty? |
| 14:31 | jnettlet | purch, yes. trusty has a newer version of Xorg that changes ABI |
| 15:20 | coinsen | i couldnt get xbmc working with 3.10 on archlinux |
| 15:20 | coinsen | it segfaulted all the time |
| 15:21 | jnettlet | coinsen, you need to patch xbmc or your kernel. to handle the new framebuffers name |
| 15:21 | coinsen | oh, okay |
| 16:07 | warped-rudi | Hi, anyone else having problems with PHY detection on I4 ? |
| 16:08 | warped-rudi | I.e.: fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch |
| 16:08 | warped-rudi | libphy: PHY fixed-0:00 not found |
| 16:09 | warped-rudi | fec 2188000.ethernet eth0: could not attach to PHY |
| 16:47 | tomlohave | warped-rudi: did you test latest u-boot ? |
| 16:48 | warped-rudi | Only the one we use in Geexbox. Is there a newer one ? |
| 16:49 | tomlohave | just push it |
| 16:49 | tomlohave | pushed* |
| 16:50 | warped-rudi | building... |
| 16:51 | tomlohave | didn't get the time to upload tarball |
| 16:51 | tomlohave | sorry |
| 17:02 | warped-rudi | No change. |
| 19:49 | mal- | anyone tried android on cuboxi |
| 19:51 | coinsen | yup |
| 19:51 | coinsen | and it crashed :D |
| 19:51 | mal- | :) |
| 19:59 | satellit | mal- I got a stock microSD with the CUbox-i4P and it worked fine |
| 19:59 | satelli | 19:59 * satellit android |
| 20:01 | satellit | I only used it for a short time as I like the Ubuntu on the wiki better on a 16 GB microSD |
| 20:02 | satellit | write it with Win2Diskmanager and 7-Zip to decompress in M$ 8.1 |
| 20:03 | mal- | jep |
| 20:05 | satellit | I tried debian but no networking..: / |
| 20:23 | kaipee | satellit does everything work fine with the Ubuntu? |
| 20:23 | kaipee | hardware acceleration and such |
| 20:29 | satellit | Kaipee except that it has small screen resolution. minimal 640x.. but networkeing and wireless seem fine |
| 20:31 | satelli | 20:31 * satellit testing android atm....I am unfamiliar with the interface so muddling arround but google mail and browser seem fine and clock set correctly |
| 20:31 | satelli | 20:31 * satellit first time I have played with it... |
| 20:32 | kaipee | satellit you can't adjust the screen res? |
| 20:33 | kaipee | satellit have you tried Arch? I'm planning on checking Arch this week, wanna see if all the driver modules are working correct and if it has hardware acceleration yet |
| 20:37 | satellit | I do not know arch....I test for fedora (sugarlabs) so mainly f20 (rawhide) |
| 20:38 | satellit | ubuntu only seems to have one resolution... |
| 20:38 | satellit | lo |
| 20:38 | satellit | f21 (rawhide)* |
| 20:50 | kaipee | satellit have you got fedora running on it? and does everything work? |
| 20:51 | zuse__ | hi |
| 20:51 | zuse__ | i have a cubox-i 4 but does not get it booting. |
| 20:52 | zuse__ | i made and SD card with geekbox, and put it into the device. But after powering it (keyboard, hdmi tested with a pi, power adapter is from solid run) i do not see anything on the screen. The only sign of life is the red LED in the SPDIF. I saw an front LED in some videos, but never saw it on my device. |
| 20:52 | zuse__ | does the cubox-i display something without an SD card? |
| 20:53 | davorin | nope |
| 20:53 | davorin | no front led = can't read boot loader from microsd card |
| 20:54 | davorin | if you put the sd card into your pc, do you see the boot partition being mounted? |
| 20:54 | satellit | kaipee: I am using a custom f20 Schoolserver (XSCE) that we are testing for One Laptop Per Child (Haiti) |
| 20:54 | davorin | it's a windows partition |
| 20:54 | zuse__ | ok. so right now no sign of a bricked device :-) |
| 20:54 | davorin | i've seen cases when the sd card is not inserted properly it won't boot. |
| 20:55 | davorin | you prepared the card under linux? |
| 20:55 | satellit | we are testing the CuBox-i4P as a potential server |
| 20:56 | davorin | what do you see if you do a "frisk /dev/sdb" or whatever device it is under linux for the sd card? |
| 20:56 | zuse__ | davorin: i tried the make-sd skript from geekbox. right now i am dd'ing the 20131212 img from solid-run to my sd card |
| 20:56 | davorin | s/frisk/fdisk/ |
| 20:56 | davorin | make-sdcard /dev/sdb geexbox-blah cubox-i ? |
| 20:56 | zuse__ | yes |
| 20:56 | davorin | okay.. |
| 20:57 | davorin | tried removing and reinserting the card? |
| 20:57 | satellit | davorin: I use m$ 8.1 with Win32Diskmangager and 7-Zip to expand first works nicely |
| 20:57 | davorin | or another sd card? |
| 20:57 | zuse__ | davorin: several times ... |
| 20:57 | zuse__ | no other sd card right now |
| 20:57 | davorin | so you see the win partition when you mount the sd card under windows? |
| 20:57 | davorin | no windows here (o; |
| 20:57 | zuse__ | all other small SD cards are in my mobile phones |
| 20:58 | zuse__ | davorin: my debian KDE showed two partitions from geekbox on the sd |
| 20:58 | davorin | sandisk or other brand? |
| 20:58 | davorin | two partitions is right |
| 20:58 | zuse__ | sandisk 8GByte |
| 20:58 | davorin | should work... |
| 20:58 | mal- | got the same |
| 20:59 | davorin | had a customer retiring his i4p but turned out it was fine...same behavior |
| 20:59 | mal- | perhaps turn the sd card |
| 20:59 | zuse__ | mal-: it does not fit the other way round :) |
| 20:59 | mal- | :) |
| 20:59 | mal- | mit gen�gen kraft schon:) |
| 20:59 | davorin | well..theoretically you could inject the boot code via upper usb port (o; |
| 20:59 | zuse__ | mal-: gnaa :) |
| 21:00 | davorin | as it turns the upper usb port into a serial port when it doesn't find boot code on sd slot |
| 21:00 | mal- | try a geexbox image |
| 21:00 | mal- | if ur device is workin |
| 21:00 | davorin | try another cubox (o; |
| 21:01 | zuse__ | davorin: it took 6 weeks to get it :-P |
| 21:01 | davorin | if cubox-i4p is okay it should draw a current of around 0.18 - 0.22A without sd card |
| 21:01 | davorin | hat much? |
| 21:01 | davorin | that |
| 21:01 | davori | 21:01 * davorin has some spare here (o; |
| 21:02 | zuse__ | davorin: would be nice if "here" would be Aachen, germany :) |
| 21:02 | davorin | https://shop.klingler.net/category.en.php?id=10015 |
| 21:02 | davorin | well.. .ch it is |
| 21:02 | davorin | and sometimes i deliver via dhl across the border in waldshut |
| 21:07 | zuse__ | after "dd if=geexbox-devel-20131212-r16611.cuboxi-patched-cubox-i4pro.img of=/dev/sdc" i see files, but my cubox-i 4 does not show the frontLED or a image via hdmi on my tv... |
| 21:11 | satellit | I find that the red LED only lights if booting correctly |
| 21:12 | zuse__ | satellit: good to know. |
| 21:13 | zuse__ | trying geexbox-devel-20140321-r16989 with latest make-sd right now |
| 21:20 | satellit_e | zuse__: it is possible to insert the microSD in error and miss the contacts. i remove the HDMI plug and power then insert microSD at right angles to back of case..: ) |
| 21:20 | satellit_e | just an idea |
| 21:24 | zuse__ | satellit: thanks :-) i always remove the hdmi to be able to get the sd out. |
| 21:25 | zuse__ | the microSD seems quite right in the case. the front is inline with the front of the cubox |
| 21:25 | davorin | any1 seen rabeeh lately here? |
| 21:40 | mal- | jep |
| 21:40 | mal- | joined 30min ago |
| 21:43 | zuse_ | 21:43 * zuse__ seems to have no luck with this 8GByte microSD. btw not from sandisk, but samsung |
| 21:44 | zuse__ | have to buy another one tomorrow |
| 21:45 | zuse__ | thanks davorin and mal- for telling me, that my box is probably not dead |
| 21:45 | davorin | i've experienced severe problems with some sd cards brands, though on raspberry pi.... |
| 21:46 | davorin | mostly kingston cards...1 out of 3 didn't work... |
| 21:46 | davorin | on pc they worked normally... |
| 21:46 | davorin | i always test every cubox-i shipped with a geexbox sd card since then ;-) |
| 21:49 | zuse__ | my dealer has only 8 and 16 GByte kingston on stock... hmm |
| 21:49 | kaipee | when trying to update Arch kerel to latest I get uboot-cubox-i: /boot/SPL exists in filesystem |
| 21:53 | zuse__ | davorin: experience with verbatim SDs? |
| 21:53 | davorin | nope..only selling sandisk and sony |
| 21:54 | zuse__ | thx |
| 21:54 | davorin | u r welcome (o; |
| 21:54 | davorin | is there already a german speaking cubox forum? |
| 21:54 | davorin | think i have to set on up (o; |
| 21:56 | mal- | ich bin dabei |
| 21:56 | davorin | (o; |
| 21:56 | zuse__ | vielleicht ist eine rubrik im solidrun forum schonmal ein anfang |
| 21:56 | mal- | :) nein,ich glaub das lohnt sich nicht |
| 21:57 | zuse__ | immerhin hat das schonmal ein paar user |
| 21:57 | kaipee | anyone know why the Arch guide states that the latest kernel doesn't work with XBMC ? |
| 21:57 | davorin | well..i would prefer different sub forums for different distributions...and applications... |
| 21:57 | davorin | #define latest kernel? |
| 21:58 | davorin | geex uses 3.10.30 |
| 21:58 | mal- | davorin: i talk with rabeeh about sub forums.... |
| 21:58 | mal- | but too much "clickin" |
| 22:02 | davorin | well..thanks... |
| 22:02 | davorin | but i need him regarding the state of hb2.1 |
| 22:02 | mal- | i think its all up to date:) |
| 22:03 | davorin | up2date? |
| 22:03 | mal- | pm |
| 22:04 | kaipee | davorin http://archlinuxarm.org/platforms/armv7/freescale/cubox-i |
| 22:04 | kaipee | (bottom of page under installaiton tab) |
| 22:09 | kaipee | I can't seem to SSH into my cubox after connection closed |
| 22:58 | satellit_e | how do I attach a sata 2 1/2 HD drive and mount it? on CUbox -4P Hotplug/ |
| 22:58 | satellit_e | hotplug? |