06:55 | aural | How does the CuBox-i4Pro compare to the ODROID-U3 with regards to XBMC performance with vartiety of encoded 1080P videos? |
06:56 | aural | I presume that the network (gigabit) connectivity prevents that as a bottleneck for streaming that is more concerning with the ODROID-U3 |
07:25 | jnettlet | aural, even 100BT internet is more than capable of handling streaming. Raw Blue-ray format has a data rate of 53.95Mbps |
07:26 | jnettlet | currently I have no problems streaming 1080p content even on the lowest end CBI/HB1. single-core 512MB's DDR. |
07:27 | jnettlet | and we are constantly working to optimize the performance experience. |
12:22 | rigo_ | hey. can i get the full quality and speed from cubox what i get right now from an amd e450 asus board? |
12:23 | cbxbiker61__ | rigo_, they're pretty close depending on what you're doing |
12:23 | rigo_ | i saw some youtube videos and im not convinced. however cubieboard (which is weaker as cubox) works almost fine.. so cubox should work good. |
12:24 | rigo_ | yep sorry. as htpc. movies hd movies with hd sound. and xbmc |
12:25 | cbxbiker61__ | here's how it is today... an e450 plays everything you can through at it with the exception of something like h265 which is really experimental at this time anyway |
12:25 | cbxbiker61__ | e450 will handle all of the high-def audio passthrough formats |
12:26 | cbxbiker61__ | cubox-i will handle pretty much all of the same video that an e450 can handle... |
12:27 | rigo_ | cbxbiker61__: pretty much means? :) i dont want to see laggy videos or menunavigations or laggy/unplayable sound. |
12:27 | cbxbiker61__ | but i'm pretty sure the high-def audio formats doesn't have driver support yet, that will be one of my focuses as soon i get my order of 4 cubox-is |
12:28 | cbxbiker61__ | laggy can't be use for either device |
12:28 | cbxbiker61__ | video ==, high dev audio formats != |
12:29 | cbxbiker61__ | so unless you want to drive a multi-speaker high-def surround setup through an amp that does the docode, they are pretty much eqaul |
12:30 | cbxbiker61__ | docode/decode |
12:31 | cbxbiker61__ | what's the chip after e450?...that's the one i have, and i have tested the cubox-i devboard |
12:31 | rigo_ | i guess i must wait a bit. |
12:32 | cbxbiker61__ | what are you doing? |
12:32 | rigo_ | wait for the software to be complete. |
12:33 | cbxbiker61__ | your driving an hdmi decoding amp? |
12:33 | rigo_ | in fact i have a tevii s662 what doenst work with arm-s yet. |
12:33 | rigo_ | yep. a yamaha rx-v1067 |
12:33 | rigo_ | pretty much of a high end stuff (for me at least) |
12:34 | cbxbiker61__ | the zotac amd micro with remote control works great with linux |
12:35 | cbxbiker61__ | my goal will be to bring the cubox-i audio handling up to the capability of the amd hardware, i'd guess it may take up to a year |
12:36 | cbxbiker61__ | but in the meantime i'll have to zotac attached to the tuner, and use cubox-i's everywhere else |
12:36 | cbxbiker61__ | the cubox-i hardware is great |
12:37 | rigo_ | its "large" for me. i wouls hide the cubox behind the tv somewhere. i have an asus e45m1-m deluxe. it is a mini itx either. still needs more power and space as a cubox. |
12:37 | rigo_ | yep looks good. but would need more software support. or more developers. |
12:38 | rigo_ | cec has also problems as i read. |
12:38 | cbxbiker61__ | well arm hardware just doesn't have the resources of an amd/intel/nvidia, so it takes a while |
12:38 | rigo_ | right. but needs almost no power at all :) |
12:39 | cbxbiker61__ | i meant resources as in developer resources |
12:39 | rigo_ | i see. ok. misunderstood. |
12:39 | rigo_ | too bad. this is the future. i hope.. not the large atx boards with 10" coolers and loads of noise and power usage.. |
12:40 | cbxbiker61__ | i like my zotac...but it does make some noise and heat |
12:42 | cbxbiker61__ | everyone is going to the smaller form-factors including amd/intel |
12:43 | cbxbiker61__ | i had a 6 core with dedicated graphics, prior to switching over to the zotac....you really can't tell the difference in xbmc |
16:26 | dz0ny | Travis: |
16:26 | dz0ny | Err http://us.archive.ubuntu.com/ubuntu/ precise-updates/main apache2.2-bin amd64 2.2.22-1ubuntu1.4 |
16:26 | dz0ny | 404 Not Found [IP: 2001:67c:1562::14 80] |
16:26 | dz0ny | ups |
16:26 | dz0ny | nvm |
18:07 | coin3d | hey there guys. i can |
18:08 | coin3d | i can't get IR working on archlinux |
18:08 | coin3d | neither on 3.0.35, nor on 3.10 |
18:08 | coin3d | the lirc devices are created successfully, but the remotes dont work properly |
18:09 | coin3d | when i use pre-defined configs (e.g. for apple remote), no key presses are recognized at all |
18:09 | coin3d | anyone got an idea? |
19:14 | esing | Hi, I expected Hummingboard to be released in March, but I didn't see any announcements yet. Are there new informations about its release? |
19:16 | davorin | version 3.0 in manufacturing... |
19:16 | davorin | no release date yet... |
19:17 | jnettlet | core developers should be receiving boards soon. Which means product release will be after that. |
19:18 | jnettlet | I just saw a few of the early press photos. It looks good! |
19:18 | jnettlet | if you are into ARM dev boards :-P |
19:19 | suihkulokki | :) |
19:19 | davori | 19:19 * davorin ordered jetson tk1 (o; |
19:20 | davorin | my hb2.0 should arrive tomorrow... |
19:20 | jnettlet | really? that is a lot of chip |
19:20 | davorin | well..preordered two of those |
19:20 | jnettlet | yeah I am waiting for my care-package but didn't get a shipping notice. |
19:21 | rabeeh | jnettlet: care package will be on the way on Sunday |
19:21 | rabeeh | your shipment was delayed because we started shipping to customers first ! |
19:21 | jnettlet | rabeeh, ah okay. |
19:21 | davorin | any1 tried the radxa? |
19:22 | rabeeh | sorry for the delays; but you should be happy since you will get a pretty good hacked CBi on the way too (with the p channel transistor) |
19:23 | jnettlet | :-) |
19:23 | jnettlet | perfect timing. I should have my second revision of 3.10.30 sorted by then |
19:23 | esing | rabeeh: Oh, so customer could already purchase the HB? |
19:24 | jnettlet | and possibly my first attempt at a DirectFB driver based on etnaviv |
19:24 | rabeeh | esing: not yet |
19:24 | esing | Ah, you meant you shipped other boards like cubox to customers first. |
19:25 | rabeeh | about 100 protos were manufactured of rev 2.0 and rev 3.0 is the mass production one |
19:25 | rabeeh | esing: yes. CBi for customers first since there was a long long long queue |
19:27 | esing | Core developers check how different linux distributions work with cubox hardware and patch addtitional stuff? |
19:27 | esing | s\cubox\Hummingboard v3.0 |
19:33 | rabeeh | yes |
19:33 | davorin | ...and develop hardware (o; |
19:33 | rabeeh | HB 3.0 was designed to keep most of the software infrastructure invested in CBi; but there are changes since HB brings 2 times more features |
19:34 | esing | Good to know, thanks |
19:35 | rabeeh | esing: the benchmark will be having same micro SD card booting on ALL versions of HB and all versions of CBi |
19:52 | mal- | i think it will be released end april |
22:20 | deniska | Hello, anyone succeed in running accelerated X11 on arch on cubox i4 pro? |
22:22 | coin3d | deniska: not really, i failed mostly on glx error |
22:22 | coin3d | s/i/mine |
22:24 | deniska | http://hastebin.com/heyohatowo.vbs that's what I have in Xorg.conf |
22:24 | deniska | derp |
22:24 | deniska | in Xorg.log.0 |
22:25 | deniska | I have file called /usr/lib/xorg/modules/dri/vivante_dri.so |
22:25 | deniska | But nevertheless it can't find it, or it looks in different place |
22:44 | deniska | I'd be glad if someone created ubuntu 12.04 or 14.04 image with everything working =( |