01:09 | Tenkawa | yay... now my cubox-i is running ssd via esata |
01:09 | Tenkawa | that should help a lot |
01:42 | DZII | Hello All when trying to stop boot to upgrade ArchLinux kernel after hitting key to stop boot it just keep posting Timeout on interrupt endpoint |
05:34 | nikBNC | Is rabeeh on? |
05:36 | nikBNC | I cannot get my cubox i to boot |
05:36 | nikBNC | I'm on my 2nd replacement |
05:37 | nikitis | What all needs to be plugged in to see the red dot on the side? |
05:37 | nikitis | I have HDMI and Power right now |
05:38 | nikitis | I commented out /* bootargs_video=gpumem=64M video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24 fbmem=10M */ |
05:38 | nikitis | and uncommented bootargs_video=video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 |
05:39 | nikitis | i plug in the power supply, Red light comes on in the spdif port, but not in the front. |
05:39 | nikitis | And that's it |
05:39 | nikitis | What am I doing wrong? |
05:39 | nikitis | I wrote the android image using win32diskimager |
05:39 | nikitis | md5sum matches |
06:45 | _dab_ | No red light means no uboot. Look up the wiki for installing uboot |
11:47 | heap_ | hi, any progress with xbmc on cuboxpro1? |
12:06 | dv_ | most people are developing for the cubox-i now, although I think xbmc supports the vMeta video accelerator on the cuboxpro's marvell SoC |
12:07 | Coolgeek | heap_: check geexbox |
12:25 | heap_ | Coolgeek: i dont wanna distro ;-) just package |
12:54 | Tenkawa | greetings all |
13:12 | rabeeh | Tenkawa: hey |
13:18 | Tenkawa | trying to tune/tweak my kernel yet more.. |
13:18 | Tenkawa | heheh |
13:40 | Tenkawa | bbiaf |
15:06 | davorin | nada...uboot finds the dtb file...but then nothing... |
15:06 | davorin | with the geexbox-20140404 kernel i get |
15:06 | davorin | Starting kernel ... |
15:06 | davorin | Uncompressing Linux... done, booting the kernel. |
15:06 | davorin | and then silence |
15:06 | davorin | with git kernel pull fmor yester day just: |
15:06 | davorin | Starting kernel ... |
15:23 | jnettlet | davorin, your best bet is to build a kernel with the debug_uart set and earlyprintk |
15:24 | davorin | ah now boots...with copied dl dtb |
15:24 | davorin | but then stops with mmcblk errors |
15:24 | rabeeh | hehe... you confused it |
15:25 | davorin | mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400900 |
15:25 | davorin | mmcblk0: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 |
15:25 | davorin | mmcblk0: retrying using single block read |
15:25 | rabeeh | i think HB won't trust you anymore |
15:25 | davorin | git kernel doesn't even work properly on cbi-1 |
15:25 | rabeeh | davorin: are you using the base or the pro? |
15:25 | davorin | pro |
15:25 | davorin | with git kernel and selfmade dts i won't show anything during boot |
15:25 | rabeeh | i mean the HB carrier |
15:26 | davorin | yes pro |
15:31 | davorin | so is the mmcblk0 different on dl and q? |
15:31 | davorin | booting with the som-i1 on hb-pro is fine with same kernel |
15:32 | davorin | or something with the fsmount fecked... |
15:32 | davorin | the som-i4 halts just before: |
15:32 | davorin | EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) |
15:33 | davorin | btw: what rise time of the power supply is required? |
15:33 | davorin | doesn't always do a proper reset when pluggging in the microusb supply |
15:49 | davorin | definitively to do with mmc |
15:49 | davorin | missing this messages on som-i4p: |
15:49 | davorin | mmc0: host does not support reading read-only switch. assuming write-enable. |
15:49 | davorin | mmc0: new high speed SDHC card at address e624 |
15:49 | davorin | mmcblk0: mmc0:e624 SU16G 14.8 GiB |
15:49 | davorin | mmcblk0: p1 p2 |
15:50 | davorin | doesn't see any partitions |
15:50 | davorin | only: mmcblk0: mmc0:e624 SU16G 14.8 GiB |
15:52 | rabeeh | ? |
15:52 | davorin | the same kernel doesn't list the sdcard partitions on som-i4 |
15:53 | davorin | that's why it's throwing up when trying to mount rootfs: |
15:53 | davorin | mmcblk0: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 |
15:56 | davorin | aah... |
15:56 | davorin | seems geex-0404 kernel is fecked.. |
15:56 | davorin | works with git kernel now |
15:57 | davorin | but not with custom dtb |
15:57 | davorin | ah feck..wrong som inserted (o; |
15:58 | davorin | nope...same...mmc fecked with git kernel |
16:00 | rabeeh | have you tried msata? |
16:00 | davorin | not yet... |
16:00 | davorin | don't have anything to preinstall it |
16:00 | davorin | is mmc different on dl and q? |
16:01 | rabeeh | same mmc |
16:01 | rabeeh | nothing pre installed :) |
16:09 | davorin | so need a msata/usb or msata/sata adapter first... |
16:19 | davorin | jnettlet: doesn't see the microsd partitions with copied dtb file on som-i4 |
16:20 | jnettlet | davorin, but the same card works okay in a CBi4p? |
16:20 | davorin | yes....and om som-i1 |
16:20 | davorin | then it takes anyway another dtb file |
16:22 | jnettlet | davorin, which .dtb file are you using for the HB-i4p? |
16:22 | davorin | the dl-hummingboard copied over |
16:22 | davorin | also tried with self made dts...but then no boot at all |
16:23 | davorin | actually took the imx6dl-hummingboard.dts and changed the imx6dl.dts to imx6q.dts in the include statement |
16:32 | jnettlet | try setting no-1-8-v; in the usdhc2 section. |
16:32 | jnettlet | that should be set automatically based on the pin config, but who knows |
16:32 | davorin | well with the selfmade dts/dtb is doesn't start the kernel at all |
16:39 | davorin | nope, same |
16:39 | jnettlet | it will be faster to debug once rmk and I get our hardware. |
16:40 | davorin | you get the hb3 probably |
16:42 | jnettlet | hb2 and 3 will be similar enough to debug |
16:43 | davorin | haven't seen the design files yet of hb3.. |
16:44 | davori | 16:44 * davorin switching computer... |
17:19 | davorin | hangs even when supplying a different rootfs on som-i4 |
17:19 | davorin | som-i1 boots nice into usb stick |
17:21 | davorin | what also pops up: |
17:21 | davorin | failed to disable 1.2 GHz OPP |
17:21 | davorin | failed to disable 850 MHz OPP |
17:27 | davorin | hmm...disabling mmc makes it worse when mounting /dev/sda2 |
17:32 | rabeeh | davorin: which power supply are you using? |
17:32 | davorin | power supply is fine...5.02v constant |
17:32 | davorin | 2a |
17:34 | davorin | did you had successful boot with hb-pro and som-i4? |
17:35 | davorin | and if, which image did you use? |
17:37 | davorin | to my knowledge there are no 5v/3a power supplies with usb-a socket |
17:38 | davorin | have to make place on my other desk first and hook it up to another power supply and measure with my lecroy dso |
19:02 | nikitis | rabeeh: Hey are you there? |
19:14 | davorin | he might be on vacation already... |
19:15 | nikitis | ah i had an RMA'd Cubox i4 Pro |
19:15 | nikitis | I just got it back, and it wouldn't boot again, but this time, I did manage to boot doing a weird trick |
19:16 | nikitis | if I power it up, it won't boot, but if I quickly pull power, and plug back in it will |
19:16 | davorin | out 12 candles in a circle around it? |
19:16 | davorin | power supply from solidrun? |
19:16 | nikitis | yes |
19:17 | davorin | dunno them... |
19:17 | davorin | use my own 5v/3a |
19:17 | davorin | might be power up rise time is too slow.. |
19:17 | nikitis | Probably what was wrong with the first one |
19:19 | nikitis | it runs fine so far once booted |
19:21 | davorin | have the same issue with hb2 with som-i4 |
19:25 | jnettlet | nikitis, are you using the latest u-boot binaries? We just pushed some fixes last night. |
19:54 | nikitis | no, and I'm not sure how to use them |