02:06 | moz68 | hello |
07:02 | supsup | anyone around? |
07:19 | supsup | exit |
09:17 | matoking | Hey, I'm trying to build and install a kernel module for this WiFi dongle I have, but it's complaining about missing kernel headers |
09:17 | matoking | I'm trying to use the --kernelsourcedir option to tell it where the kernel source is located, but it's not helping |
09:18 | matoking | This is the command I'm trying to run dkms build 8192cu/4.0.29 --kernelsourcedir=/home/debian/Source/linux-linaro-stable-mx6 |
09:20 | matoking | Of course, I could do away with the WiFi dongle entirely if the "really low upload speed when uploading files to Cubox-i" issue was fixed, but I don't think that's the case :/ |
09:24 | jnettlet | matoking, it will be fixed. I am working on a new kernel now. I have just so much time to work on this though. |
09:26 | matoking | Yeah, it's just taking a really long time, which is why I'm trying to use a WiFi dongle instead |
09:27 | jnettlet | yes, well work needs to happen as well |
09:27 | jnettlet | matoking, why don't you build the drivers from the linux-backports project against your tree and see if that helps your wifi performance? |
09:36 | matoking | Well I'm going to try something else instead |
09:37 | matoking | Have the Cubox-i download the files from my desktop PC |
09:48 | matoking | Just set up a VNC for the first time :) |
09:54 | matoking | Well looks like I'm getting even worse results with that trick |
09:55 | matoking | I'm getting better download and upload speeds when I'm accessing the Internet, but when I'm accessing devices in the local network it goes down to as much as 80 KB/s |
09:57 | matoking | So, the obvious solution is that I'll have my connection go through a VPS I have in order to upload files from my desktop PC to my Cubox |
10:44 | matoking | I compiled the kernel based on the linux-linaro-stable-mx6 repository |
10:44 | matoking | Where can I find or how can I create the kernel headers? |
11:31 | matoking | Well I did manage to improve the download/upload speed by using compression |
11:32 | matoking | Works well with uncompressed files such as SQL but otherwise it's not that much of a help |
17:00 | msalerno | Can anyone give any advice for getting past a "lirc_serial lirc_serial.0: Bad irq number or handler" boot error on Arch linux? |
20:08 | casepie | Lotta people lurking. Anybody active? |
20:09 | malte | jep |
20:09 | casepie | has anyone ordered a cubox-i in the last month or so? If so, do you have any idea what the shipping lag is? (i.e. how long)? |
20:10 | malte | between 1-4 months |
20:16 | bartoli | Hello, I have a problem while booting my cubox-i4pro |
20:17 | bartoli | The bootproces gives following output: http://pastebin.com/QRcL7nL7 |
20:18 | bartoli | Tried different sdcard, archlinux, debian and geexbox |
20:18 | bartoli | keep getting the same problem |
20:19 | bartoli | Any ideas? |
20:20 | Coolgeek | he loop to try to find something to boot on... if it boot, it's OK then |
20:22 | wbx | bartoli: how you created the scard? can you show fdisk output of your sdcard? |
20:24 | bartoli | The output of the card: http://pastebin.com/CrPCgJ1J |
20:25 | bartoli | I hope that is what you are asking for |
20:25 | bartoli | It doesn't boot, that is the problem |
20:26 | bartoli | I don't get any hdmi output |
20:27 | bartoli | I wanted to install a arch on it |
20:27 | wbx | bartoli: what is the content of the first fat partition? |
20:28 | wbx | bartoli: u-boot does not show up on hdmi? how you installed u-boot onto the sdcard? |
20:28 | bartoli | I have been trying different methods |
20:28 | wbx | bartoli: which version of u-boot are you using? |
20:29 | bartoli | Tried the manual arch installation on the arch website |
20:29 | wbx | bartoli: do you have a link? |
20:30 | wbx | bartoli: and could you show the full boot look of u-boot, you cutted the first entries.. |
20:31 | bartoli | the howto I used: http://archlinuxarm.org/platforms/armv7/freescale/cubox-i |
20:31 | bartoli | I also tried the 'script' version on the solidrun website |
20:31 | bartoli | Both give no result |
20:33 | bartoli | The version of U-boot I used is the image contained in the boot folder of ArchLinuxARM-imx6-cubox-latest.tar.gz |
20:33 | bartoli | Like it says in the howto really |
20:35 | wbx | bartoli: show the complete u-boot log |
20:36 | bartoli | Is this it? http://pastebin.com/WXfmMrJW |
20:39 | wbx | huch. Marvell Sheeva?! this is a cubox-i4pro? |
20:40 | bartoli | That what I bought |
20:40 | bartoli | Are you saying I'm using the wrong U-Boot |
20:46 | wbx | that or you got the wrong hardware. marvell is cubox1 |
20:47 | bartoli | Great.. |
20:48 | bartoli | Your saying they send me an older version of the cubox? |
20:50 | wbx | CPU: Freescale i.MX6Q rev1.2 at 792 MHz |
20:51 | wbx | that is what my cubox-i2ultra says. but your u-boot is too old. maybe it misinterpret the bits and bytes |
20:51 | wbx | bartoli: get a recent SPL and uboot.img |
20:53 | bartoli | wbx: thanks could you just give a link where U can find these? |
20:53 | wbx | can you cross-compile? |
20:54 | bartoli | Never done it... |
20:54 | wbx | hmm. |
20:54 | bartoli | I'm using arch on my laptop |
20:55 | wbx | bartoli: let me see if i can get you a recent u-boot |
20:55 | jnettlet | bartoli, it looks like you have the Cubox Pro, not the Cubox-i Pro |
20:55 | jnettlet | The Cubox Pro is the original cubox with 2GB's of RAM |
20:56 | wbx | bartoli: try http://openadk.org/cubox/ ... and show the results. |
20:57 | bartoli | I think jnettlet is on to something |
20:58 | jnettlet | the "i" stands for iMX6 |
20:58 | jnettlet | Pro denotes 2 or more gigabytes of memory |
20:58 | bartoli | On my invoice it does says CuBox Pro |
20:58 | bartoli | Not Cubox-i Pro |
20:58 | jnettlet | did you buy this from a UK reseller? |
20:59 | bartoli | yes I'm from Belgium |
20:59 | bartoli | so I had to go throught NewIT |
20:59 | jnettlet | yep, other people have had the same confusion happen |
20:59 | wbx | bartoli: the good thing about it, you have a nice crypto coprocessor (CESA) ;) |
21:00 | bartoli | Sorry for my ignorence but how do the cubox Pro and cubox-i Pro compare? |
22:54 | mhoney | google is your friend ;) |
23:10 | malte | http://imx.solid-run.com/forums/viewtopic.php?f=16&t=1069 |
23:10 | malte | ;) |