| 14:33 | topi` | jnettlet: OK, so I'll hunt for signals on the ttymxc2 :) I think I already tried it as well, but it might well be that I didn't e.g. check if all the leads were actually connecting |
| 14:33 | topi` | with a multimeter |
| 14:34 | topi` | jnettlet: wasn't it so that in the old images for HB1, the ttymxc2 was used for the BT uart? |
| 14:34 | jnettlet | topi`, uart2, which would be ttymxc1 |
| 14:34 | jnettlet | one of those annoying device-tree things |
| 14:43 | topi` | ok |
| 17:20 | Artox | just a quick question so I dont destroy anything |
| 17:20 | Artox | can I safely put a SoM with only 2 connectors on a HB2? |
| 17:21 | jnettlet | Artox, yes, but it won't work properly. You can add it, but will then need to manually specify the .dtb file to use. Some of the board functionality won't work. |
| 17:25 | Artox | what dtb would I manually choose then? |
| 17:25 | Artox | still hb2 one? |
| 17:27 | jnettlet | yes |
| 17:27 | Artox | okay, thanks |
| 17:59 | dgilmore | jnettlet: how bad would it be to use a clearfog without a heatsink? |
| 19:22 | jnettlet | dgilmore, depends what you are doing. |
| 19:23 | jnettlet | Permanently I wouldn't recommend it but for light testing should be fine |
| 19:37 | dgilmore | jnettlet: okay. I have one heatsink for the two clearfogs |
| 19:37 | Exag | 19:37 * Exaga waits patiently for the clearfog |
| 19:37 | dgilmore | jnettlet: what screw is needed for the m.2 connector? |
| 19:38 | Exaga | dgilmore: same one as in your brothers laptop ;) |
| 19:39 | dgilmore | Exaga: if only I had a brother |
| 19:40 | Exaga | dgilmore: it was just a thought :D |
| 19:40 | dgilmore | Exaga: :) |
| 19:42 | jnettlet | I believe m2.5 |
| 19:43 | Exaga | 2.5mm metric thread |
| 19:43 | jnettlet | There are plenty of clearfog devices. It is the heatsinks that are back ordered. |
| 19:43 | Exaga | jnettlet: the clearfogs are shipped without heatsinks? |
| 19:43 | jnettlet | Nope, with. They are back ordered which is holding up our shipments |
| 19:44 | Exaga | jnettlet: damn |
| 19:44 | jnettlet | dgilmore will get another heatsink shipped separately |
| 19:44 | dgilmore | jnettlet: cheers |
| 20:18 | vpeter | Can someone confirm if running this http://wiki.solid-run.com/doku.php?id=products:imx6:microsom:imx6-fuse will write correct fuse to HummingBoard to boot from SD card? |
| 20:21 | jnettlet | It will |
| 20:23 | jnettlet | vpeter, I thought your friend wanted to boot from emmc |
| 20:23 | dgilmore | jnettlet: http://paste.fedoraproject.org/310925/45279939/ |
| 20:24 | jnettlet | dgilmore, excellent! |
| 20:25 | dgilmore | jnettlet: thats using fedora's kernel and making a dtb from the patches rmk has submitted for upstream |
| 20:25 | dgilmore | jnettlet: the u-boot is whats going upstream with a patch I need to send it to support the generic distro boot framework |
| 20:26 | dgilmore | I am going to push the fedora kernel maintainers to pull in the dtb patches |
| 20:26 | jnettlet | Great thanks |
| 20:27 | jnettlet | Is Fedora going to support docker containers on ARM32 since it is working upstream now? |
| 20:29 | dgilmore | jnettlet: we have supported them for awhile |
| 20:29 | dgilmore | though I build the base image at home on the side |
| 20:29 | dgilmore | I am working to make the base image part of the fedora deliverables for f24 |
| 20:30 | jnettlet | Let us know if there is anything else we can do |
| 20:30 | dgilmore | we have had docker building on arm32 for quite awhile now |
| 20:30 | jnettlet | I want this to trickle back to CentOS 7.1 if possible |
| 20:31 | dgilmore | :) understandable |
| 20:31 | dgilmore | they are taking alot of things we do in fedora and rebuild them |
| 20:31 | jnettlet | Exactly |
| 20:49 | vpeter | jnettlet: Yes it was. But after your indication that this should not be done he change the idea. |
| 20:56 | jnettlet | Not that it shouldn't be done. I just think that sdhc cards are cheap and as long as you aren't writing to thank a lot they make a convenient recovery path |
| 21:00 | vpeter | Yes, that's why he change the mind. I think it would be nice if this reasons would be written somewhere on wiki. Then he would not even bough unburned som. |
| 21:04 | jnettlet | Sure good timing. malte is working on the wiki |
| 21:10 | vpeter | malte_: Perfect. Tomorrow is D day. |
| 21:33 | jnettlet | Heatsinks will be back in stock in 2 weeks. Sorry about the delays |