| 23:59 | mhilt | just to try something - I commented out the /subdev ov5640 from it's Makefile, and changed the /capture ov5640 Makefile to remove the 'int' ... |
| 00:00 | mhilt | bitbake -f -c compile virtual/kernel rebuilt the modules |
| 00:00 | mhilt | but not the rootfs image .. which I assume would need core-image-x11 .. but also would kill my changes |
| 00:01 | mhilt | so I just copied the new ov5640_camera.ko from /capture to my existing SD card rootfs |
| 00:01 | mhilt | and removed /subdev ov5640_camera.ko |
| 00:02 | mhilt | modprobe fails, indicating a mismatch of some sort |
| 00:03 | mhilt | I can insmod the ko file, but can't use it |
| 00:09 | delete | maybe the kernel you are compiling the module for is not the same version that the kernel you are running? |
| 08:49 | vpeter | jnettlet: thanks. |
| 08:49 | jnettlet | vpeter, did you find the problem? |
| 08:50 | jnettlet | should that image have kodi running on it? |
| 08:53 | vpeter | Yes, kodi should working. But "problematic" user didn't gave any response back yet and don't know if also boots for him. Can you also try http://vpeter.libreelec.tv/imx6-solidrun-kernel-3.14/LibreELEC-imx6.arm-8.0.1-sr-3.14.img.gz to see if it even boots? Because for this user it disn't boot. |
| 08:53 | vpeter | If you have time... |
| 08:54 | jnettlet | sure. downloading it |
| 08:55 | vpeter | No rush - at work so no testing for me for next 9 hours. |
| 11:54 | jnettlet | topi`, were you able to get your board sorted out? |
| 11:58 | topi` | jnettlet: it now boots into SDcard :) and yes, the last patch from rmk sorted the mmc0 issue |
| 11:59 | topi` | I have one board here with me, trying to solder it (R48) to see if it works |
| 11:59 | topi` | if emmc works |
| 12:03 | topi` | jnettlet: sorry I doubted your instructions about the R48, since it occurred to me it was next to the *carrier* eMMC, whereas the eMMC is located on the *SOM* on my board |
| 12:03 | topi` | but if rabeeh says so, it must be so ;) |
| 12:28 | jnettlet | topi`, no problem. With the iMX6 usoms the power conversion is done on the carrier, that is why you need power that rail from the carrier. At least on our boards. Of course other carriers could power all those rails from a single line. |