09:36 | vpeter> | Nice board :) https://www.cnx-software.com/2018/08/03/clearfog-gt-8k-high-end-networking-sbc-marvell-armada-a8040-processor/ |
09:38 | Ke> | vpeter: they took my sata =o( |
09:38 | Ke> | luckily mcbin is still there |
10:28 | flips> | Ke: Oh ... didn't recognize that mode ... seems to work :) |
10:38 | vpeter> | Ke: I was thinking the same. Maybe sata can be done through mPCIe. |
12:03 | Ke> | now compiling master linux |
14:02 | mearon> | Ke: what are you using your mcbin for? |
14:02 | Ke> | nas/router |
14:02 | mearon> | primary router? |
14:02 | Ke> | also other services |
14:03 | mearon> | asking b/c you seem to recompile / play around with it quite often |
14:03 | Ke> | well I don't have any servers at home, I can deal with the downtime |
14:04 | mearon> | okay :) FWIW I have an Omnia and want to replate pre-installed "TurrisOS" with openWRT when I get the time |
14:05 | mearon> | s/replate/replace/ |
14:05 | Ke> | that's a bit more difficult, I can just change eg. kernel from boot menu |
14:05 | Ke> | EFI is on sd card |
14:06 | mearon> | what OS are you running on your mcbin? |
14:06 | Ke> | since I already have my own controller on it, I could just do user selectable boot, if I had the headers in stead of the dip switches |
14:06 | Ke> | debian/sid |
15:49 | Ke> | jnettlet[m]: thanks, confirmed that superficially there is nothing wrong with linux-4.18-rc7++ with marvell fw release 18.06/edk2-marvell-armada-wip |
15:50 | Ke> | even the serial on the gpio header works with upstream dtb, so no pathing anymore |
15:51 | Ke> | jnettlet[m]: I have eth3, who is that guy? |
16:00 | Ke> | I am also fairly certain that mcbin just needs hard reset to reboot |
16:00 | Ke> | meaning complete poweroff from AC side |
16:13 | Ke> | 10G not working though |
16:13 | Ke> | at least in 1G mode |
16:17 | Ke> | manually setting 1G mode gives EINVAL |
16:17 | Ke> | perhaps only 10G mode is supported |
18:12 | Ke> | anyone coming to boozeassembly btw. |
18:12 | Ke> | mostly finns probably |