| 01:57 | phr0stbyte> | anyone have a build of edkII for the mcbin? |
| 01:58 | phr0stbyte> | I am not a compiler guru and the linaro toolchain links are all broken. All I need is a current build so I can do some testing. |
| 19:28 | phr0stbyte> | any macchiatobin experts on here today? I am trying to figure out how to tell if my v1.2 board already has the resistor in place for the GPU reset fix. |
| 19:41 | vpeter> | phr0stbyte: Maybe this could help you? http://wiki.macchiatobin.net/tiki-index.php?page=MACCHIATObin+%28up+to+rev+1.2%29+PCIe+reset+fix |
| 19:42 | phr0stbyte> | unfortunately, it doesn't give any guidance as to how to tell if it is already done. |
| 19:43 | phr0stbyte> | I have no idea what batch my board came from other than that it doesn't have a jtag, but still has a closed connector. for all I know, it could be a much earlier run without JTAG or it could be a partially remediated board with the resistor placed somewhere on the board that isn't directly attached to the pcie slot, but rather at the other end of the trace. |
| 19:53 | vpeter> | Check if you see any resistor between pads A11 and A12 if I read instructions correctly. It is written in confusing way for me :) |
| 19:53 | vpeter> | When did you bough it? |
| 19:57 | phr0stbyte> | I got the board second hand last year. |
| 19:58 | phr0stbyte> | thus why I am looking for a guru from solidrun or someone who has a partially remediated board that can definitively say how to tell. |
| 19:58 | vpeter> | Because on a link above you can read "The September batch of MACCHIATObin has the resistor assembled". |
| 21:41 | phr0stbyte> | right, it just never says where they put the resistor |
| 23:57 | Bluerise> | phr0stbyte? |
| 23:57 | phr0stbyte> | yes |